Miele CVA 7775 - Building In the Appliance; Safety Precautions for Built-in Installation

Installation
*INSTALLATION*
111
Building in the coffee machine
 Danger of injury due to incorrect
operation.
A machine that has not been built in
is not safe and can cause injuries.
Do not operate the coffee machine
unless it has been built in.
 Danger of damage due to
incorrect operation.
If the ambient temperature range is
not observed, the coffee machine
can not function properly.
The coffee machine may only be
operated within an ambient
temperature range of +60°F to
+100°F (+16°C to +38°C).
Maintain the required minimum
installation height of 337/16"
(850mm).
 Risk of damage and injury from
the coffee machine tipping over.
If the coffee machine is not yet
screwed to the cabinet, the
appliance may tip forward when the
appliance door is open.
Make sure that a second person fully
secures the coffee machine during
installation.
First screw the top-left screw to the
cabinet.
Risk of damage due to the use of an
electric screwdriver.
If the coffee machine is secured with
an electric screwdriver, e.g., cordless
screwdriver, the chuck may damage
the appliance door and/or the
interior.
Only use a manual screwdriver to
secure the coffee machine in the
cabinet.
To install the machine, you will need a
TX20 screwdriver.
Connecting the plumbed-water and
electricity supplies
Observe the information under
“Plumbed-water connection” and
“Electrical connection”.
 Connect the coffee machine to the
plumbed-water and electricity
supplies.
Tip: We recommend providing a place
to sit the coffee machine which is the
same height as the building-in niche.
This will make it easier to connect the
machine to the electricity and water
supply.