Miele CVA 7775 - Maintenance Timer and Cancellation; Configuring the Maintenance Timer; Canceling Automatic Maintenance

Automatic cleaning and descaling
90
Setting the Maintenance Timer
The drinks menu is displayed.
 Touch the sensor control.
 Select Maintenance.
 Select Maintenance timer.
 Change the settings as required.
 Confirm withOK.
The start time is saved. From now on,
the automatic maintenance programs
will commence at the desired time each
day.
Canceling automatic cleaning
and descaling
You can cancel the automatic cleaning
programs during the holding time.
If the automatic cleaning program is
not performed five times in a row, the
dispensing of drinks is blocked. You
will only be able to make drinks again
once the brew unit has been
degreased and/or the milk pipework
has been cleaned.
 Tap theOn/Offswitch.
The time left in hours is shown in the
display.
 Tap Cancel.
The cleaning or descaling solution is
rinsed out of the pipework. Rinsing can
take up to 5minutes. You can now
make drinks.