Cleaning and care
71
Remove the milk valve cover. Press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover, you will find a pin for swiveling
the cover out.
Detach the milk pipework from the
dispensing unit on the central
spout and from the milk valve
silicone seal( and).
Remove the milk pipework
connecting the milk valve to the
central spout.
Disconnect the angular molded hose
from the round hose.
Rinse the hoses thoroughly under
running water.
Do not remove the connecting pieces
from the hoses.
Press the catches on the left and
right-hand sides of the milk valve
holder and pull the holder forward to
remove it.
Take the holder and silicone seal
apart.
To Next Page
Loading...
