Miele CVA7845 - Dispensing Warm or Hot Water

Preparing beverages
41
The drinks menu is displayed.
 Tap the Backsensor button.
 SelectSettings | Timer | TeaTimer.
 Select the setting you want.
Making tea
The drinks menu is displayed.
 Pour loose tea into a tea filter or
similar or take a tea bag out of the
packet.
 Place the tea filter or the tea bag in
the tea cup.
 Place the tea cup under the central
spout.
 Select the type of tea on the display.
Hot water will be dispensed into the
cup.
If TeaTimer | Automatic has been
selected, the kitchen timer for the
brewing time will start running once the
water has been dispensed.
Alternatively, you can also start the
TeaTimer function manually at this point.
Starting the
TeaTimer
manually
 Prepare a cup of tea.
 Tap TeaTimer.
The editor will open with a suggested
time.
 Change the brewing time if
necessary.
 Confirm withOK.
After the brewing time has elapsed, an
audible signal will sound and the
symbol will flash.
 Remove the tea filter or tea bag when
the desired brewing time has
elapsed.
Tea pot
The Tea pot function allows you to
make a large quantity of tea (maximum
of1liter). The type of tea selected
determines the preset temperature.
The drinks menu is displayed.
Tip: Make sure that the water container
has enough water inside it before you
start making a pot of tea.
 Place a sufficiently large container
under the central spout.
 Select the tea pot option you want.
 Select the number of cups you want
(3to8).
You can interrupt the dispensing
process at any time.
 TapCancel.
Dispensing warm or hot water
You can choose between the following
options:
- Hot water at approx.195°F (90°C)
- Warm water at approx.150°F (65°C)
The drinks menu is displayed.
 Place a suitable container under the
central spout.
 Choose between warm or hot water.
Dispensing will start.