Need help?Do you have a question about the Miele DA 220-4 and is the answer not in the manual?
General| Number of speed settings | 3 |
|---|---|
| Material | Stainless steel |
| Width | 598 mm |
| Filter Type | Grease filter |
| Control Type | Buttons |
| Operating mode | Recirculation |
General safety guidelines, intended use, and warnings about hazardous materials for safe operation.
Safety precautions for preventing cooktop fires, ensuring proper electrical connection, and safe installation practices.
Guidelines for safe user interaction, operation with cooktop, and maintenance of filters and cleaning methods.
Specific safety rules for installation, including electrical, air flow, ducting materials, and clearances.
Explains the air extraction process and the function of the non-return flap for ventilation.
Diagram and list of all external components and controls of the ventilation system.
Detailed explanation of each button on the control panel and their respective functions.
Instructions for turning the fan on, adjusting fan speed levels, and using the intensive setting.
How to program the intensive fan level to automatically revert to a lower setting.
Details on the fan's maximum airflow capacity and the percentage of capacity for each speed level.
How to use the delayed shut down feature and turn off the fan, including automatic shut off.
Instructions for operating the overhead lighting, including turning it on, off, and dimming its brightness.
Information about the filter timer, how to check its status, and when cleaning is required.
Procedure for adjusting the grease filter timer to different operational hour settings.
Safety warnings and general methods for cleaning the hood casing, stainless steel parts, and controls.
Step-by-step guide on how to safely remove the reusable metal grease filters for cleaning.
Instructions for cleaning grease filters manually or using a dishwasher, including reset procedures.
Procedure for safely replacing the halogen light bulbs, including necessary precautions.
Guidance on contacting the Miele Technical Service Department for repairs and support.
Information about Miele's Extended Service Contract program for appliance protection.
Advises users to read all instructions and the installation diagram before proceeding with installation.
Instructions for removing the protective film from the casing parts before installation.
Information on the proper disposal and recycling of the appliance's packing materials.
Guidance on how to safely and responsibly dispose of an old appliance for recycling.
Provides detailed measurements and diagrams of the ventilation system's physical dimensions.
Specifies minimum safety distances required between the cooktop and the bottom of the hood.
Details on how to securely attach the ceiling mounting plate to structural framing for hood support.
Lists all the necessary accessories and hardware required for the installation process.
Steps for preparing the ceiling, cutting the exhaust hole, and positioning the mounting plate.
Instructions for drilling mounting holes and securing the ductwork to the mounting plate.
Securing the mounting plate to structural framing and routing the power cable.
Guide for lifting and attaching the hood to the mounting plate and connecting the power cable.
Final steps to install the cover plate and prepare the appliance for use by removing filter foil.
Guidelines for selecting and installing exhaust ducting, ensuring efficient air extraction and noise reduction.
Information on the optional condensate trap and its correct installation for managing moisture.
Advice on preventing condensation in ductwork running through varying temperature zones and inactive flues.
Essential safety information regarding electrical connections, grounding, and the need for qualified electricians.
Specific instructions on how to hard wire the appliance, including wire connections to the terminal block.
To Next Page
