When putting the grease filters back
make sure that the locking clips are vis
-
ible facing down towards the cooking
surface.
If a filter is incorrectly installed, insert a
small screwdriver into the slit along its
edge to disengage it from the casing.
^
After returning the grease filters,
press the grease filter button for
3 seconds to reset the timer. The indi-
cator light will go out.
^ If the grease filters are cleaned be-
fore the timer has reached its maxi-
mum, the grease filter button should
be pressed for 6 seconds to reset the
counter to zero.
Cleaning and Care
15
To Next Page
Loading...
