Miele DA 2578 - Signing out of Wi-Fi (Reset to Factory Settings)

Before using for the first time
20
 Start the Wi-Fi connection on your
Wi-Fi router.
When successfully connected 2 and 3
will light up constantly.
 Quit connection mode on the
rangehood by pressing the run-on
control.
The rangehood can now be operated
via the App.
If the connection fails, you have
probably not connected WPS to your
router quickly enough. Repeat the steps
above.
Useful tip: If your Wi-Fi router does not
support WPS, please connect via the
Miele@mobile App.
Signing out of Wi-Fi (reset to factory
settings)
To set up a new Wi-Fi connection, the
existing Wi-Fi connection must first be
disconnected.
 Manually switch the rangehood off.
 Press and hold the  control.
 Touch the lighting control at the same
time.
With an existing Wi-Fi connection 2 and
3 will light up constantly.
The rangehood is ready for
disconnection during the next two
minutes.