Cleaning and care
27
Important for appliances with
stainless st
eel surfaces
(This information does not apply to the
contr
ols).
S
tainless steel surfaces can be
cleaned with a proprietary non-
abrasive cleaning agent designed
specifically for use on stainless steel.
T
o help prevent re-soiling, a
proprietary conditioning agent for
stainless steel (available from Miele)
can also be used.
Apply sparingly with a soft cloth.
Important for appliances with
lacquer
ed housing
Please
observe the general notes on
cleaning earlier in this section.
It is very difficult to clean this type of
sur
face without causing minor marks
to the surface material. This can
become particularly noticeable if there
is halogen lighting in the kitchen.
Important for the controls
Do not leave soiling on the controls
for any length of time.
Otherwise they may suffer
discol
ouration or damage.
Remove soiling straight away.
Please
observe the general notes on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
To Next Page
Loading...
