Activating Con@ctivity 2.0
44
Installing the Con@ctivity 2.0
S
tick
In order to use the Con@ctivity 2.0
fun
ction, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Ple
ase read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the
hob and the cooker hood
before the Con@ctivity 2.0 function can
be used.
Both appliances must be installed and
oper
ational.
Wireless connection must be activated
on the co
oker hood and the hob at the
same time. Activation on the cooker
hood is described below.
Activation on the hob is described in
the relevant Operating and installation
instructions. Please refer to the
Operating instructions before starting.
Activate the cooker hood first, then the
hob.
Activating the cooker hood
The
hob and cooker hood must be
switched off.
P
ress the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
The
n press in turn,
– the "" contr
ol,
– then the "" contr
ol,
– then the lighting control .
The cooker hood is now in signing
on/off mode.
If a wireless connection has not yet
been established 2 and 3 will flash at
the same time.
If a
wireless connection has already
been established, 2 and 3 will light up
constantly (Con@ctivity 2.0 is already
activated or a remote control is signed
on).
T
o activate Con@ctivity 2.0, press the
"" control.
The search for a signal will start.
Mean
while, start activating the hob.
To Next Page
Loading...
