Installation
36
a
1 collar for e
xhaust ducting 150
mm.
b
1 reducing collar for exhaust
ducting 125 mm.
c
1 non-return flap for fittin
g into the
exhaust socket on the motor unit
(not needed for recirculation mode)
d
1 cover to close off the upper
exhaust socket when ducting to the
rear or the side (...EXT models only)
e
Miele DUU 2900 conversion kit for
r
ecirculation mode (not supplied,
see "Technical data" for part number
to order).
4 x M5 x 40 mm screws, 4 washers,
4 x M5 nuts for securing
the cooker
hood to an interim shelf.
To Next Page
Loading...
