Building in depth of the wall
unit
The depth required will depend on the
lightshield and where it is positioned.
Appliance with DFB lightshield
(Supplied as standard in Australia)
If the appliance is to be fitted with the
lightshield flush against the front panel
of the wall unit the following building-in
depth A is necessary:
A = min. 273 mm with a 16 mm thick
furniture door
A = min. 270 mm with a 19 mm thick
furniture door
Using a lightshield which matches
existing kitchen furniture
If the appliance is to be fitted into a wall
unit in a kitchen run, with a lightshield
to match the existing kitchen furniture,
then a minimum distance B of 275 mm
is required behind the lightshield.
Appliance dimensions
20
To Next Page
