To switch the fan on
^
Press the On/Off control.
The fan runs at power level "II".
The indicator lamp will come on.
To select a power level
^ Use the – / + controls to select the
power level required.
+ control = higher setting
– control = lower setting
Depending on the intensity of the
cooking vapours, levels I to III are
usually sufficient for normal cooking.
Intensive setting
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting for a short period.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^
To set this option, both the fan and
the hob lighting must be switched off.
^
Press the run-on option control for
approximately 10 seconds. The first
fan setting indicator will light up.
^ Then press, one after the other,
– the hob lighting control,
–
the – control, and
–
the hob lighting control again.
Use
15
To Next Page
Loading...
