Cleaning and care
28
Replace
the grease filter, making sure
that the locking clip is facing down
towards the cooktop.
If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
Resetting the filter saturation
count
er for the grease filters
Once cleaning is complete, the filter
satur
ation counter must be reset.
While
the fan is turned on, press the
filter saturation indicator for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol goes out.
When cleaning the grease filters before
the full oper
ating time has elapsed:
P
ress the filter saturation indicator
for approx. 6 seconds until 1 is
the only indicator flashing.
OdorFree Charcoal Filter
If the hood is connected for
r
ecirculation, an OdorFree Charcoal
Filter must be inserted in addition to the
grease filter. This is designed to absorb
cooking odors.
It is fitted in the canopy above the
grease filter.
OdorFree Charcoal Filters are available
fr
om your Miele dealer or from Miele
Service. See "Technical data" for the
type and reference number.
Installing/replacing the OdorFree
Char
coal Filter
T
o install or replace the OdorFree
Charcoal Filter, the grease filters must
first be removed as described above.
Remo
ve the charcoal filter from its
packaging.
Inser
t the charcoal filter into the side
of the charcoal filter frame, and then
push it up into the frame.
Replace
the grease filter.
When insta
lling the filter for the first
time, activate the filter saturation
counter (see "Operation").
To Next Page
Loading...
