Miele DA 6498 W - Odorfree Charcoal Filter; Resetting the Filter Saturation Indicator for the Charcoal Filters; Disposing of Charcoal Filters

Cleaning and care
40
OdorFree Charcoal Filter
With recirculation mode, a charcoal
filter must be fitted in addition to the
grease filter. The charcoal filter is
designed to absorb cooking odors.
The charcoal filter is fitted in the top of
the ventilation hood.
How to install/replace a charcoal
filter
 Take the charcoal filter out of its
packaging.
 Fit the charcoal filter into the holder in
the top of the ventilation hood.
When to change the OdorFree
Charcoal Filter
 Replace the charcoal filter when it no
longer absorbs kitchen odors
effectively.
It should be replaced at least every 6
months.
The filter saturation indicator reminds
you to regularly clean the charcoal filter
by illuminating the charcoal filter
symbol.
Resetting the filter saturation
indicator for the charcoal filters
After changing the charcoal filters, the
filter saturation indicator must be reset.
 Touch the charcoal filter control  for
approx. 3seconds with the blower
switched on until only the indicator
light for level 1 is flashing.
The charcoal filter symbol will go
out.
If you want to replace the charcoal filter
before the full operating time elapses:
 Touch the charcoal filter control  for
approx. 6seconds until only the
indicator light for level 1 is flashing.
Disposing of charcoal filters
 The used charcoal filter can be
disposed of with the normal
household waste.