Operation
16
Turning on the fan
Tap the On/Off button .
The fan switches to level 2.
Selecting the power level
Power levels 1 to 3 can be used for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the 4
intensive level.
Select the power level required by
tapping a button from 1 to 4.
Reducing power of the intensive
setting
If power management is activated
(default setting), the fan automatically
switches back to level 3 after 5 minutes.
Automatic power reduction of
the intensive setting
The intensive level can be programmed
to switch back to level 3 automatically
after 10 minutes.
Turn off the fan and the lighting.
Press the delayed shut down button
for approx. 10 seconds until 1
lights up in the fan power display.
Next, tap the following buttons in
succession:
– The lighting button ,
– Followed by the 1 button and then
– The lighting button again.
If automatic switch-off is not activated,
the 1 and 4 displays will flash.
Tap 4 to turn it on.
The 1 and 4 indicators are constantly lit.
Tap 1 to turn off.
The 1 and 4 indicators flash.
Confirm the setting by pressing the
delayed shut down button .
All the indicator lights will go out.
If the setting is not confirmed within 4
minutes, the old setting is retained.
To Next Page
Loading...
