Miele DAS 4720 - Replacing the Grease Filter

Cleaning and care
30
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filter for cleaning,
also clean off any residues of oil or fat
from the now accessible casing to
prevent the risk of these catching fire.
 Reinsert the grease filter.
Resetting the filter saturation
indicator for the grease filter
Once cleaning is complete, the filter
saturation indicator must be reset.
 While the fan is turned on, press the
filter saturation indicator for
approx. 3seconds until 1 is the only
indicator flashing.
The grease filter symbol goes out.
When cleaning the grease filter before
the full operating time has elapsed:
 Press the filter saturation
indicator for approx. 6seconds
until 1 is the only indicator flashing.
Replacing the grease filter
Regular usage and cleaning can cause
the filter surfaces to become worn.
If you identify any damage, replace the
grease filter.
Grease filters are available to order via
Miele Customer Service (see end of
these operating instructions for contact
details) or from your Miele dealer.