Operation
16
Extending/retracting the
deflector plate, switching the
fan on/off
Touch the On/Off control .
The deflector plate comes up. The fan
switches on at power level 2, the hob
lighting switches on at 70% brightness.
Touch the On/Off control briefly to
switch the fan off.
The fan can be switched on again by
briefly touching one of the fan power
level controls.
Press the On/Off control for longer
to retract the deflector plate.
Select the power level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
When frying or cooking food with a very
strong aroma, select the Intensive
setting IS.
Select the power level required by
touching a control from 1 to IS.
Reducing power on the
intensive setting
The fan power level will automatically
reduce to level 3 after 5 minutes.
Selecting the run-on time
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering vapours and
odours in the air.
With the run-on option the fan switches
itself off automatically after 15 minutes.
After you have finished cooking,
press the run-on option control 15.
The fan will switch itself off after 15
minutes. The deflector plate stays up.
If you touch the run-on option control
15 again, the fan will remain on.
Switching the hob lighting
on/off
The cooker hood lighting is switched
on and off when the deflector plate is
extended and retracted.
The hob lighting switches on at 70%
brightness.
Touch the hob lighting control to
switch the lighting to 100%
brightness.
Touch the hob lighting control again
to switch the lighting off.
To Next Page
Loading...
