Cleaning and care
19
Grease filters and panel for
edge extraction
The edge extraction panel and the re-
usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
An oversaturated filter is a fire
hazard.
Cleaning interval
The edge extraction panel should be
cleaned regularly (at least every 3 - 4
weeks) to avoid a build-up of grease.
After 30 operating hours the grease
filter symbol will light up when the
deflector plate is out, to remind you to
clean the edge extraction panel and the
grease filters.
Removing the panel and grease
filters
The panel is held in place by magnets
at the top. Pull the panel forwards by
the upper edge, unhook it at the
bottom and remove it.
Open the grease filter retainer catch
and remove them.
If charcoal filters are fitted to the back
of the grease filters, they must be
removed before cleaning (see
"Charcoal filters").
To Next Page
Loading...
