Temperature |
The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".
The temperatures are shown in
°C/Celsius by default.
^
Select the desired temperature unit
and confirm with OK.
Buzzer O
When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.
The buzzer at the end of a program is
turned on by default.
Buzzer at the end of a program
The buzzer at the end of a program
sounds five times in intervals with a brief
break in between. The buzzer sounds up
to one hour if the dishwasher in not
turned off.
Buzzer in case of a fault
The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer for a fault cannot be set
to off.
Buzzer volume
Two buzzer volumes can be selected or
the buzzer can be turned off.
Off
The buzzer tone at the end of a
program is turned off.
Soft
The tone sounds in a soft volume.
Loud
The tone sounds in a loud volume.
^
Select the desired volume or
deactivate the buzzer.
^
Confirm with OK.
Settings J
45
To Next Page
Loading...
Need help?
General
