Issue Possible fault Solution
Detergent is left in the
dispenser at the end of a
program.
The dispenser was
damp when
detergent was
added.
Dry the dispenser before
adding detergent.
The detergent lid cannot
be closed properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the interior
walls are still wet after a
program has finished.
This is not a fault. It is
the normal operating
mode of the drying
system.
The moisture will evaporate
after a short time.
Water remains in the
wash cabinet at the end
of a program.
Before fixing the fault:
–
Turn the dishwasher off s.
The triple filter in the
wash cabinet is
clogged.
Clean the triple filter. See
"User Maintenance
Instructions".
The drain pump or
the non-return valve
may be blocked.
Clean the drain pump and
non-return valve, see
maintenance instructions.
The drain hose is
kinked.
Remove any kinks from the
drain hose.
Frequently asked questions
52
To Next Page
Loading...
Need help?
General
