Checking the programmed water
hardness level
^
Switch the dishwasher off with the
On/Off button K.
^
Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the "Start/Stop" indicator light
comes on.
^
Press the programme selector button
twice.
The Wash/Rinse indicator will flash for
the number of times which corresponds
to the water hardness level which has
been set (see chart).
^ Switch the dishwasher off with the
On/Off button K.
Before using for the first time
16
To Next Page
Loading...
