To clean the inside of the filter, the flap
must be opened:
^ Press catches a together in the
direction of the arrows as shown,
and open the filter b.
^ Rinse all the filters under running
water.
^ Then close the flap so that the catch
engages.
^
Replace the filter combination so that
it lies flat in the base of the wash
cabinet.
^ Then turn the handle clockwise, until
the arrows line up, to lock the filter
combination in place.
,
Take care when you are fitting
the filter combination that it is
secured in position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
Cleaning and care
37
To Next Page
Loading...
