Problem Possible cause Remedy
Dishes, cutlery
and glasses are
not dry or are
flecked.
The amount of rinse aid
may be insufficient, or the
rinse aid reservoir empty.
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer. See
"Operation".
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
Not enough rinse aid was
used.
Increase the dosage. See
"Before using for the first time
- Rinse aid".
There is no salt in the salt
reservoir.
Fill the salt reservoir. See
"Before using for the first time
- Filling the salt reservoir".
The salt reservoir cap has
not been screwed on
correctly.
Replace it, making sure that it
screws back on correctly.
An unsuitable combination
detergent has been used.
Change your detergent. Use a
standard liquid, tablet or
powder detergent.
The water softener is
programmed to a setting
which is too low.
Select a higher water softener
setting. See "Before using for
the first time".
Problem solving guide
45
To Next Page
Loading...
Need help?
General
