Turning on
^
Open the water supply, if closed.
^
Open the door.
^
Make sure the spray arms can rotate
freely.
^
Turn the dishwasher on "K".
The "Start/Stop" indicator flashes and
the indicator next to the last program
selected is lit.
Selecting and starting a
program
Choose your program according to the
type of load and soiling. See the
"Program Guide" for more information.
^
Select the desired program with the
"Program" button.
The program indicator of the selected
program lights. The time display shows
the duration of the selected program in
hours and minutes.
^
Select an additional function if
desired, see "Additional options" for
more information.
^ Press the "Start/Stop" button.
The program starts. The indicators for
"Start/Stop", "Rinse" and the program
selected will light up.
If the options "Turbo" and/or "Tab" are
selected the relevant indicators will also
light up.
Cancel a program only in the first
few minutes. Otherwise important
program steps may be interrupted.
Use
24
To Next Page
