Default settings
All settings can be reset to the factory
default.
^
Turn the dishwasher off "K".
^
Press and hold the "Start/Stop" button
and at the same time turn the
dishwasher on "K". Hold the
"Start/Stop" button until the
"Start/Stop" indicator lights up.
If it does not come on, start over.
^
Press the "Delay Start" button 12
times.
The "Delay Start" indicator gives on long
flash and two short flashes in intervals.
The time display shows if a setting was
changed.
–"p 1": All settings are factory default.
–"p 0": At least one setting was
changed.
^ To reset the dishwasher to the factory
default settings, press the "Start/Stop"
button.
The setting is saved.
^
Turn the dishwasher off "K".
Additional options
30
To Next Page
Loading...
