Additional functions
Delay start
The start time of a programme can be delayed, e.g. to benefit
from economy rates of electricity. A delay start time of
between 15 minutes and 24 hours can be selected. The delay
start time is set in 15 minute steps.
When using the Delay start function, make sure that the
detergent compartment is dry before adding detergent.
Wipe dry with a cloth if necessary. If the compartment is
wet, powder detergent can become lumpy and stick to the
dispenser, with the result that it is not fully dispensed.
Do not use liquid detergent when selecting Delay start, as
it can run into the dishwasher before it is required.
^ Switch the dishwasher on with the On/Off sensor pad s.
^ Select the programme you want from the main menu.
^ Select the
Start time option from the programme menu.
The last start time selected will appear in the display.
Sensor wash 1:32 h
12:00
° Extras
+ °
° Start time 20:00
- °
Finish at 21:32
OK °
^
Use +/- to select the time you want the programme to start
at.
If the sensor pad is kept pressed in, the time will
automatically decrease or increase.
The end time alters accordingly automatically.
Operation
40
To Next Page
