Miele G 1830 - Page 48

Problem Possible cause Remedy
The buzzer sounds.
The following fault
message appears in
the display:
Technical fault FXX.
Call the Service
Department.
There may be a technical
fault.
–
Switch the dishwasher off
with the On/Off sensor
pad s.
After a few seconds:
–
Switch the dishwasher
back on.
–
Select the programme you
want.
–
Select
Start.
If the fault message appears
again, there is a technical
fault.
– Call the Service
Department.
The buzzer sounds.
The following fault
message appears in
the display:
Waterproof fault F70
The Waterproof system
has reacted.
– Close the stopcock.
– Call the Service
Department.
Problem solving guide
48