Checking the programmed water
hardness level
^
Switch the dishwasher off with the Off
button V.
^
Press the programme selector button
;? in, and whilst holding it in
switch the dishwasher on using the
On button U.
Keep the programme selector button
;? pressed in until the lower right
hand programme indicator comes
on.
^
Press the programme selector button
;? twice briefly.
The upper right hand programme
indicator will flash for the number of
times which corresponds to the water
hardness level which has been set (see
chart).
^ Switch the dishwasher off with the Off
button V.
Before using for the first time
17
To Next Page
Loading...
