Switching on
^
Open the stopcock, if it is closed.
^
Open the door.
^
Make sure the spray arms are not
obstructed.
^
Switch the dishwasher on using the
On button g.
The On indicator g and the indicator for
the last used programme light up.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the programme
chart later on in this booklet.
Starting a programme
^
Select the programme required using
the programme selector button.
The indicator for the programme
selected lights up.
The programme duration will appear in
the hours and minutes in the Display.
If the "2 in 1" or "3 in 1 Tab" function has
been selected, the corresponding
indicator lights up as well.
You can now select an additional
function (see "Additional functions").
^ Close the door.
The In-operation indicator lights up to
show that a programme has been
started.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
31
To Next Page
Loading...
Need help?
General
