Miele G 5000 SC ACTIVE - Cleaning Spray Arms and Filters

Cleaning and care
69
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
regularly (approx. every 2–4months).
Never run a wash programme
without using the spray arms.
 Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters fitted.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation
system.
 Switch the dishwasher off.
Removing the cutlery tray (if present)
In order to be able to remove the upper
spray arm, you first have to remove the
cutlery tray (if present).
 Pull out the cutlery tray.
 Press the rail safety clips on both
sides of the cutlery tray together
and remove the safety clips.
 Take out the cutlery tray completely.