General problems with the dishwasher
Problem Possible fault Solution
The display is dark
and only the " U "
indicator lights.
The indicator lights go out
automatically to save
energy (Standby).
Press any button (except
V) to come out of Standby
mode.
Detergent residue is
left in the dispenser at
the end of a program.
The dispenser was damp
when detergent was added.
Dry the dispenser before
adding detergent.
The detergent
dispenser lid cannot
be closed properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program
has finished.
This is not a fault!
It is the normal operating
mode of the drying system.
None!
The moisture will
evaporate after a short
time.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
with the V button.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter (see
"Cleaning and care").
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
The drain hose is kinked. Remove any kinks from the
drain hose.
Frequently Asked Questions
40
To Next Page
Loading...
