EasyManuals Logo

Miele G 5266 User Manual

Miele G 5266
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Initial commissioning
23
Reactivation salt
In order to maintain the functions of the
water softener, it must be reactivated
regularly.
In order to be reactivated, the water
softener requires reactivation salt.
Depending on the water hardness level
(<3.8mmol/l, or <21°dH – German
scale), reactivation salt may not be
required if combination detergents are
being used (see “Active ingredients”
under “Detergents”).
If the water in your area is very soft
and constantly lower than 0.9mmol/l
(5°dH – German scale), you do not
need to add reactivation salt. The salt
refill reminder will automatically turn
off after the water hardness has been
set accordingly (see “Displaying and
setting the water hardness level”
under “Before using for the first time”).
Damage to the water softener
from detergent.
Dishwasher detergent will damage
the water softener.
Do not fill the salt reservoir with
powder or liquid detergent.
Damage caused by using
unsuitable salts.
Some types of salt may contain
insoluble components which can
cause the water softener to
malfunction.
Use only special, coarse-grained
reactivation salt or other pure
evaporated salt.
If you only ever use combination
detergent products containing salt and
rinse aid in your dishwasher, you can
turn off both refill reminders if you
wish (see “Turning off the refill
reminders” under “Options”).
Please make sure that if you stop
using combination detergents, you
refill the reactivation salt and rinse
aid. Turn the refill reminders back on
if required.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 5266 and is the answer not in the manual?

Miele G 5266 Specifications

General IconGeneral
Appliance placementFreestanding
Built-in displayYes
Inlet hose length1.5 m
Outlet hose length1.5 m
Number of washing programs6
Delayed start timerYes
Delay start (max)24 h
AquaStop functionYes
Child lockYes
Power consumption (off)0.5 W
AC input voltage230 V
AC input frequency50 Hz
Width60 cm
Product size60 cm
Number of place settings14
Washing programsAuto, Eco, Intensive, Quick
Water consumption per cycle9.5 L
Connected load2100 W
Depth60 cm

Related product manuals