Miele G 5280 SCVi User Manual

Correct installation
~
The dishwasher must be installed and connected in compliance
with the diagram supplied.
~
Take care, both before and during installation of the
dishwasher, not to cut yourself on the metal parts. Danger
of injury. Wear protective gloves.
~
The dishwasher must be correctly aligned to ensure problem-free
operation.
~
In order to ensure stability, built-under and integrated
dishwashers must only be installed under a continuous worktop
which is secured to adjacent cabinetry.
~
If you want to convert your freestanding dishwasher to a
built-under ("U") model, you will need to order the appropriate
conversion kit. If you remove the existing plinth, you must replace it
with a U-model plinth. This is necessary to avoid the risk of injury
caused by protruding metal parts.
~
The door springs must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
open at 45°. It is important that the door is held in place by the
springs and cannot fall open.
Warning and Safety instructions
13

Miele G 5280 SCVi Specifications

General

Door color	White
Appliance placement	Freestanding
Control panel color	Stainless steel
Connected load	2200 W
AC input voltage	230 V
AC input frequency	50 Hz
Water consumption per cycle	10 L
Energy consumption per cycle	0.95 kWh
Drying class	A
Annual water consumption	2800 L
Annual energy consumption	266 kWh
Cycle time	172 min
Noise level	46 dB
Delay start (max)	24 h
Delayed start timer	Yes
Dishwashing programs	Auto, Eco, Intensive, Quick
Number of place settings	14 place settings
Number of washing programs	6

Weight and Dimensions

Depth	570 mm
Width	600 mm
Height	810 mm
Weight	50000 g