EasyManuals Logo

Miele G 5280 SCVi User Manual

Miele G 5280 SCVi
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
^
Remove the lower basket and
unscrew the salt reservoir cap.
Water or saline solution will run out
of the reservoir when the cap is
removed. It should therefore only be
removed in order to refill the salt
reservoir.
^
Fill the reservoir with approx. 2 litres
of water (first use only).
^
Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 2 kg of salt
depending on the brand used.
As the salt reservoir is filled,
displaced water will overflow.
^
Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
^
Run the Quick wash programme im
-
mediately without any crockery in the
dishwasher to remove any traces of
salt from the cabinet (do not use the
Turbo function if your dishwasher has
this feature).
Salt indicator
^
Fill the salt reservoir with dishwasher
salt when the salt indicator light
comes on. (If it comes on during a
programme, wait until the end of the
programme).
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt refill
indicator may still be illuminated during
this process. It will go out once the salt
concentration has reached the correct
level.
The salt refill indicator will not come on
if the dishwasher has been
programmed for a water hardness level
of less than 0.7 mmol/l (4 °d German
scale).
,
After filling the the salt reservoir,
run the Quick wash programme im-
mediately without any crockery in
the dishwasher to remove any traces
of salt from the cabinet (do not use
the Turbo function if your
dishwasher has this feature).
Before using for the first time
23

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 5280 SCVi and is the answer not in the manual?

Miele G 5280 SCVi Specifications

General IconGeneral
Door colorWhite
Appliance placementFreestanding
Control panel colorStainless steel
Connected load2200 W
AC input voltage230 V
AC input frequency50 Hz
Water consumption per cycle10 L
Energy consumption per cycle0.95 kWh
Drying classA
Annual water consumption2800 L
Annual energy consumption266 kWh
Cycle time172 min
Noise level46 dB
Delay start (max)24 h
Delayed start timerYes
Dishwashing programsAuto, Eco, Intensive, Quick
Number of place settings14 place settings
Number of washing programs6
Weight and Dimensions IconWeight and Dimensions
Depth570 mm
Width600 mm
Height810 mm
Weight50000 g

Related product manuals