EasyManuals Logo

Miele G 5280 SCVi User Manual

Miele G 5280 SCVi
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Cleaning the filters in the wash
cabinet
The filter combination in the base of the
wash cabinet retains coarse soil from
the suds solution, preventing it
accessing the circulation system and
re-entering the cabinet through the
spray arms.
,
This dishwasher must not be
used without all the filters in place.
Collection of coarse soil may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
Check the condition of the filters
regularly and clean them if necessary.
^ Switch the dishwasher off.
^
Turn the handle anti-clockwise to
release the filter combination a.
^ Lift the filter combination out of the
dishwasher b. Remove any coarse
particles and rinse the filter well
under running water. Use a nylon
brush if necessary.
,
Make sure that when cleaning
the filters, no coarse soil falls into the
circulation system, causing a
blockage.
Cleaning and care
55

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 5280 SCVi and is the answer not in the manual?

Miele G 5280 SCVi Specifications

General IconGeneral
Door colorWhite
Appliance placementFreestanding
Control panel colorStainless steel
Connected load2200 W
AC input voltage230 V
AC input frequency50 Hz
Water consumption per cycle10 L
Energy consumption per cycle0.95 kWh
Drying classA
Annual water consumption2800 L
Annual energy consumption266 kWh
Cycle time172 min
Noise level46 dB
Delay start (max)24 h
Delayed start timerYes
Dishwashing programsAuto, Eco, Intensive, Quick
Number of place settings14 place settings
Number of washing programs6
Weight and Dimensions IconWeight and Dimensions
Depth570 mm
Width600 mm
Height810 mm
Weight50000 g

Related product manuals