Miele G 5310 - Understanding Fault Messages

Problem solving guide
76
Fault messages
Problem Cause and remedy
The display shows a
fault number that is not
listed below.
There may be a technical fault.
 Switch the dishwasher off with the button.
 Switch the dishwasher back on after a few
seconds.
 Restart the desired programme.
If the indicator lights flash again, there is a technical
fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call the Miele Customer Service Department.
Fault :
The drain pump may
still be running, even
with the door open.
The Waterproof system has reacted.
 Switch the dishwasher off.
 Close the stopcock.
 Call the Miele Customer Service Department.
All of the programme
selection indicator
lights are flashing.
Fault number  ap-
pears in the time dis-
play.
Circulation pump fault.
 Switch the dishwasher off.
 Switch the dishwasher back on.
 Restart the desired programme.
If the fault message appears again, there is a tech-
nical fault.
 Switch the dishwasher off.
 Close the stopcock.
 Call the Miele Customer Service Department.