Turning on
^
Open the water supply, if it is closed.
^
Open the door.
^
Make sure the spray arms can rotate
freely.
^
Press the K button to turn the
dishwasher on.
The last program selected will appear
in the display and the appropriate
indicator light will come on.
After a short while, the estimated
program duration for the program
selected will appear in the display.
Selecting a program
Choose your program according to the
type of load and soiling.
See the "Program Guide" for more
information.
^ Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
You can now select the additional
options (see "Additional Options").
Starting a program
^
Start the program by closing the
door.
The optical function light comes on as
confirmation for a started program.
If additional options are selected, the
corresponding indicators will also light
up.
Cancel a program only in the first
few minutes.
Otherwise important program steps
(e.g. the water softening) may be
interrupted.
Use
33
To Next Page
Loading...
