Dishwasher model G 805 SC (i) (see data plate for model number)
The “i” model dishwasher is designed
for installation under a continuous
countertop.
A panel can be custom made for instal-
lation on the front of the dishwasher, as-
suring a perfect match with the kitchen
cabinetry.
If a standard non-cabinet matching
dishwasher installation is desired, the
“i” model dishwasher can be converted
into a “U” model through the addition of
a GDU 45/65 decor kit. The decor kit is
supplied with separate installation in-
structions.
Dimensions:
1) at maximum machine height of 35" (890 mm)
2) at minimum machine height of 33 1/8" (840 mm)
Range of adjustment is approximately
2" (5 cm).
To ensure stability, these dish-
washers should only be installed
under a continuous countertop
which is securely fastened to the
cabinet base units.
Dishwasher installation
46
To Next Page
