Switching on
^
Open the stopcock, if it is closed.
^
Open the door.
^
Make sure the spray arms are not ob
-
structed.
^
Press the "On" (15) button.
The "On" indicator light (15) comes on.
Starting a programme
^ When selecting a programme, refer
to the programme chart at the end of
the operating instructions.
^ Press button (19) for the programme
you want.
The indicator light next to the selected
programme will come on.
^
Close the door.
The in operation control light will come
on.
The programme cycle begins.
Do not finish a programme prema
-
turely. Important programme stages
(e. g. reactivating the water softener)
could be omitted.
Operating the dishwasher
33
To Next Page
Loading...
