EasyManua.ls Logo

Miele G 643 Plus - End-of-Programme Faults & Noises

Miele G 643 Plus
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem Possible cause Remedy
At the end of a
programme the in opera
-
tion control light is
flashing rapidly;
the indicator lights next
to programme buttons 1
to 5 are flashing when
the door is open.
There may be a technical
fault.
Switch the machine off.
Run another programme.
If the indicator lights flash
again at the end of this
programme, there is a
technical fault.
Call the Miele Service
Department.
Knocking noise in the
wash cabinet
The spray arm is knocking
against an item in the bas
-
ket.
Interrupt the programme,
rearrange items which are
obstructing the spray arm.
Rattling noise Items of crockery are in
-
secure in the wash cabi-
net.
Interrupt the programme,
rearrange the items of
crockery.
Knocking noise in the
water pipes
This may be caused by
the on-site installation or
the cross-section of the
piping.
This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
Problem solving guide
45

Table of Contents

Related product manuals