Operation
53
Starting the programme
P
ress the
Start or OK b
utton.
The programme will begin.
The Start indica
tor light will come on.
A programme should only be cancel‐
led in the first few minut
es, if at all.
Otherwise important programme
stages could be omitted.
Display
The estimated duration of the pro‐
gr
amme selected appears in hours and
minutes in the display before the pro‐
gramme begins. During the programme,
the time left until the end of the pro‐
gramme is displayed.
Each programme stage is indicated by
a symbol:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The programme duration displayed may
var
y with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an aver
age
time for a cold water intake.
The times shown in the Programme
char
t refer to standard test loads and
temperatures.
Each time a programme is run, the
electr
onic unit takes the new conditions
into account, and calculates the time
required.
To Next Page
