Problem solving guide
76
General problems
Problem Possible cause and remedy
The indicator lights and
displ
ay are dark.
The display has switched off automatically to save
ener
gy.
Switch the dishwasher on again with the
but‐
ton.
The interior lighting
doesn't switch on when
the door is opened.
The interior lighting has been switched off perma‐
n
ently.
Switch the lighting back on again (see "Settings
menu - BrilliantLight").
The following fault mes‐
sage appears in the dis‐
play:
Salt reservoir lid
The salt reservoir lid has not been closed properly.
Close the salt r
eservoir lid.
If the salt reservoir lid has opened during a pro‐
gr
amme:
Switch the dishwasher off and on again with the
b
utton.
Close
the salt reservoir lid.
S
tart the programme again.
Detergent residue is left
in the dispenser at the
end
of a programme.
The dispenser was still damp when detergent was
added.
Mak
e sure the dispenser is dry before adding de‐
tergent.
The detergent dispens‐
er lid cannot be closed
pr
operly.
Clogged detergent residue is blocking the catch.
Clean the det
ergent from the catch.
At the end of a pro‐
gramme there is a film
of moisture on the in‐
side of the door and the
interior walls.
This is caused by the drying system and does not in‐
dicat
e a fault. The moisture will dissipate after a
while.
To Next Page
Loading...
