Miele G 681 - Troubleshooting flashing indicator lights

Problem Possible cause Remedy
The “End”, “Start” and
“Top Solo” indicator
lights flash simulta
-
neously
There may be a technical
fault.
–
Turn the program se
-
lector to the “Stop” po
-
sition.
–
Turn the dishwasher off
using the “On/Off” but
-
ton.
After a few seconds:
–
Turn the dishwasher on
using the “On/Off” but
-
ton.
–
Turn the program se
-
lector to the desired
program.
– Press the “Start” but-
ton.
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Techni-
cal Service Depart-
ment.
Despite the problem the
dishwasher can be used
in all programs but, the
water will not heat up.
Problem solving guide
46