Problem Possible cause Remedy
The indicator light
“Intake/Drain” is flash
-
ing and the program
does not continue
Before fixing the problem
you must:
–
Turn the program se
-
lector to the “Stop” po
-
sition.
–
Turn off the dishwasher
using the “On/Off” but
-
ton.
Water intake is restricted.
–
Open the water valve
completely.
–
Check the water inlet
filter and clean if nec
-
essary, see “Cleaning
the water inlet filter”.
Water outlet is restricted,
water remains in the wash
cabinet at the end of a
program.
– Clean the filter combi-
nation, see “Cleaning
and Care”.
– Clean the drain pump,
see “Cleaning the drain
pump and non-return
valve”.
– Clean the non-return
valve, see “Cleaning
the drain pump and
non-return valve”.
–
Remove any kink in the
drain hose.
Knocking noise
in the wash cabinet
The spray arm is knock
-
ing against something in
the basket.
Interrupt the program,
rearrange items that are
blocking spray arms.
Rattling noise
Items are not secure in
the wash cabinet.
Interrupt the program, re
-
arrange dishes.
A whistling noise is
heard during the pro
-
gram
The seal of the circulation
pump sometimes makes
a whistling noise. This
may be due to the deter
-
gent.
This is not a problem. Try
another detergent. Con
-
sult the Miele Technical
Service Department if the
noise is persistent.
Problem solving guide
47
To Next Page
