Miele G 698 Plus - Delay Start Time Display and Early Start

At the end of the delay period the se
-
lected programme begins automati
-
cally. The time left for a programme to
run then shows in the display, the "De
-
lay Start" indicator light goes out and
the "Time left" indicator light comes on.
How the delay start time is shown
in the time display:
up to 59 minutes: e.g. - 30 minutes = 30
between 1 hour and 9 hours 30 min
-
utes:
e.g. 5 hours = 5.00
10 hours and over: e.g. - 15 hours = 15^
,
To avoid the danger of children
coming into contact with the dish-
washer detergent: only add deter-
gent just before starting the
programme and close the door, acti-
vating the child safety lock (depend-
ing on model).
Keep children away from the dish
-
washer when the door is open.
When using "Delay start" make sure
the deteregent dispenser is dry be
-
fore adding detergent. Do not use
liquid detergent with the option as it
may run out of the dispenser before
the programme starts.
Starting a programme before the de
-
lay start period has elapsed:
A programme can be started before the
delay start period has elapsed. Pro
-
ceed as follows:
^
Press the "Start/Stop" button (21) for
at least one second.
All the programme button indicator
lights will light up and the "Start/Stop"
indicator light will flash.
^
Press button (16) for the programme
you want.
^ Select additional function "Top Solo"
again if required.
^ Press the "Start/Stop" button (21).
The "Start/Stop" indicator light will come
on. The programme cycle begins.
Operating the dishwasher
38