Drying fan running time
During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila
-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op
-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
Activating and deactivating in
-
creased drying fan running time:
^ Switch the dishwasher off using the
"On/Off" button.
^ Press the & and "Start/Stop" buttons
in and whilst doing so switch the
dishwasher on using the "On/Off" but-
ton. Then release these buttons.
A P and two digits will appear in the
time display.
The "Salt" indicator light will flash and
the indicator lights will come on for the
"Economy" and "Universal Plus 55 ° "
programmes.
If this is not the case the process must
be repeated.
^
Press the button for the "Economy"
programme.
The following values will show in the
display:
–
90: the fan running time is not in
-
creased,
–
91: The fan running time is increased
^
Press the "Top Solo" button to change
the setting.
The value in the display will change ac
-
cordingly.
^
Press the "Start/Stop" button.
SP for save will appear in the time dis-
play.
^ Press the "Start/Stop" button again.
The fan running time change is now
stored in memory.
All the programme button indicator
lights will light up and the "Start/Stop"
indicator light will flash.
^
Switch the dishwasher off using the
"On/Off" button.
Operating the dishwasher
39
To Next Page
Loading...
