Miele G 698 Plus - Problem Solving Guide; Machine Not Starting or Stopping; Spray Arm Indicator Light Flashing

With the aid of the following guide, minor problems can be easily corrected with
-
out calling in a Miele service technician, saving you both time and money.
You should, however, note the following:
,
Repairs should only be carried out by a suitably qualified and trained per
-
son in accordance with local and national safety regulations. Unauthorised or
incorrect repairs could cause personal injury or damage the appliance.
Problem Possible cause Remedy
The machine does not
start
The door is not properly
closed.
Close the door firmly.
The appliance is not
plugged in.
Insert the plug.
The fuse is defective or
has tripped.
Replace the fuse
(see data plate for
minimum fuse rating).
The dishwasher stops
during a programme.
The fuse is defective or
has tripped.
Replace the fuse
(see data plate for
minimum fuse rating).
The "Spray arm" indica-
tor light is flashing.
Tall items are blocking the
path of the middle spray
arm.
Interrupt the programme,
rearrange items which are
obstructing the spray arm.
The middle spray arm jets
are blocked.
Before rectifying the prob
-
lem you must:
–
Switch the dishwasher
off using the "On/Off"
button.
then:
–
Clean the spray arm
Problem solving guide
46