Miele G 698 Plus - Display Error Codes

Problem Possible cause Remedy
Three horizontal bars - -
-show in the time dis
-
play at the end of the
programme:
There may be a technical
fault.
–
Press the "Start/Stop"
button for at least one
second.
All the programme button
indicator lights will light
up.
–
Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
–
Switch the dishwasher
on using the "On/Off"
button.
– Start the programme
again.
– Press the "Start/Stop"
button to start the
programme.
If the three horizontal bars
appear again at the end
of the programme, there is
a technical fault.
–
Call the Miele Service
Department.
Problem solving guide
50