Miele G 7154 - Page 57

Options
57
After you have activated the timer, the
display and the indicator lights will
switch off after a few minutes to save
energy.
Press the button to switch the
display back on for a few minutes.
 Open the door if you need to check
how long the timer has left to run.
The time up until the programme starts
can be seen counting down in the
display in hours for durations above
10hours, and in hours and minutes for
durations below 10 hours.
At the end of the start delay period, the
programme selected will start
automatically. The time remaining will
be shown in the display and the
Timer indicator light will go out.
How the time for the timer is shown
in the display:
up to 59minutes:
e.g. 30minutes=:
1hour up to 9hours 30minutes:
e.g. 5hours=:
over 10hours:
e.g. 15hours=
Starting a programme before the
time for the timer has elapsed:
A programme can be started before the
timer has elapsed.
Proceed as follows:
 Open the door.
 Switch the dishwasher off with the
button.
 Switch the dishwasher back on with
the button.
 Select the required programme.
 Start the programme by closing the
door.
The in-operation indicator light comes
on to show that a programme has been
started.