Miele G 7154 - Fault Messages

Problem solving guide
74
Fault messages
Problem Possible cause and remedy
The optical in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem, you must:
 Switch the dishwasher off.
Fault FXX There may be a technical fault.
 Switch the dishwasher back on after a few
seconds.
 Select the required programme.
 Close the door.
If the fault message appears again, there is a
technical fault.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
Waterproof The Waterproof system has reacted.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
Fault F78 Circulation pump fault.
 Switch the dishwasher off.
 Switch the dishwasher back on.
 Select the required programme.
 Close the door.
If the fault message appears again, there is a
technical fault.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.